Want to change the atmosphere of the house? One way is to do a re-paint the walls of the house. Steps to repaint not just polish the paint directly on the walls of the house. There are several steps that the paint stick well and produce the perfect look.
In general, the thing to do when going to repaint the wall is to prepare to be worthy to be painted, followed by a coat of primer on the walls and painting. Here are the steps repainting the walls:
Decide on Paint Color
Specify paint color for the room. A variety of colors may be confusing you make a decision. For help, you can berdisdkusi with family or consult with the designer.
The selected color should remain in harmony with the existing furniture. The goal is that the paint colors are not contradictory and seem tacky.
In order furniture is not exposed to splashes or drops of paint, move furniture to a safe place. If the furniture is too big or does not allow to be moved, cover furniture with plastic or newspaper. If you use a parquet floor, do not forget to cover it because the paint can be pervasive and difficult to clean.
Old Paint Peel
Old paint peel should order a new paint to stick and produce good color. Especially if the old paint was peeling. For maximum results, peeled paint to cement acian layer visible.
Check and Fix Wall
Before you start painting, you should check the condition of the wall. Among other things checked by measuring the wall moisture, humidity should be low-value walls. Another thing to check if there is seepage on the walls, crevices, cracks or nail prints.
If the condition is not ideal as the example above, fix the wall before you start painting. For moist and permeable walls, can be searched out the cause and repair. If there are cracks or the mark of the nails, should be patched first so that the wall is flat. To repair cracks or fissures can be used wall filler walls, putty or mortar acian. If the patch feels less glue, you can widen the cracks and fill with fillings earlier. After drying, smooth it with sandpaper.
Clean the wall of dirt or mold so the new paint can stick perfectly. Mushrooms can be cleaned by peeled and given anti-fungal coating.
Cover with Base coat
Priming is commonly used to coat sealer wall. Its function is so that the new paint can stick to the wall or the sempuran old paint is still attached.
If the surface of the wall had been peeled to look acian cement, suitable primer is primer alkaline resisting. What is meant by alkali cement is a kind of salt water from the mortar that has not dried completely. The reaction caused when paint meets with alkali is difficult paint will stick, so in some old paint to be bubbling, peeling or loss.
The aim is to enable plated alkali resisting paint is not directly in contact with the cement. The application also allows the base paint the desired color appears perfect. Priming should not be mixed with diluent.
Cover with First Layer
Before the first coat with paint, make sure the primer has dried perfectly. For the first layer, the paint is mixed with a diluent with a share of 5% -20%. As a diluent, can use thinners or water.
Cover with a second layer
Repeat the painting after the first coat of paint to dry. The goal is to obtain the appropriate color and perfect. The second layer of paint thinners also remains mixed with an equal portion (5-20%).